Product Description - Concept QH4000 Bedienungsanleitung

EN

PRODUCT DESCRIPTION

1 Main switch 0/I (on/off)
2 Outlet grille
3 Display
4 Remote control
5 START/STOP button (manual start without using the remote control)
1
5
3
Display
A Power supply
B Temperature
C Minimum input
D Maximum input
E Oscillation
F Temperature indicator
G Ambient temperature
H Set temperature
I Hours/Minutes
L OFF indicator
M ON indicator
N Open window function
O Week timer
P Day timer
Q Days of the week (MO-Monday, TU-Tuesday,
WE-Wednesday, TH-Thursday, FR-Friday, SA-
Saturday, SU-Sunday)
56
4
2
A B. C D E
Q
P O N
QH4000|QH4001
Remote control
1a On/Off
2b Power setting
3c Open window function
4d Oscillation
5e Day timer
6f Child lock function
7g
Week timer temperature
8h Week timer
9i + button
10l – button
11m Time/date setting
The remote control comes with a battery (type
CR2025, 3 V). Remove the protective film before
first use.
MOUNTING THE DEVICE ON THE WALL
The appliance is designed to be wall-mounted. Installation may only
be performed by a qualified person.
Before installing the appliance, make sure that there are no electrical
cables or water pipes in the place of installation.
Place the appliance at least 2 m above the floor, 25 cm from the
corner of the room and 20 cm below the ceiling. Air outlet hole must
be directed downwards (see Fig. 1).
Drill two holes in the wall according to the holes for hanging on the
back of the device.
Insert the dowels into the holes and screw the screws into them so
that they protrude 5 mm from the holes.
F
Hang the appliance on the screws and make sure that it is properly
installed.
G
H
I
L
M
QH4000|QH4001
EN
4d
1a 5e
2b 6f
3c 7g
8h
10l
9i
11m
Fig. 1
Fig. 2
57