Connecting The Accessories - Philips FC8920 Bedienungsanleitung

3 Adjust the telescopic tube to the length you find most comfortable
during vacuuming.
Hold the collar with one hand and pull the tube part above the collar
upwards or push it downwards with the other hand.

Connecting the accessories

1 To connect the tube to one of the accessories:
- Telescopic tube with conical connection (specific types only): Insert the
telescopic tube into the accessory while turning it a little.
- Telescopic tube with button connection (specific types only): Press the
spring-loaded lock button on the telescopic tube and insert the tube
into the accessory. Fit the spring-loaded lock button into the opening in
the accessory ('click').
2 To disconnect the telescopic tube from one of the accessories:
- Telescopic tube with conical connection (specific types only): Pull the
telescopic tube out of the accessory while turning it a little.
- Telescopic tube with button connection (specific types only): Press the
spring-loaded lock button and pull the tube out of the accessory.
Tip: The small nozzle, crevice tool and small brush (specific types only) can also
be connected to the handgrip of the hose.
accessory clip
1 Insert the crevice tool and the small nozzle into the clip.
2 Snap the accessory clip onto the tube.
3 Pull the accessory clip from the tube to remove it.
tri-active nozzle (specific types only)
The Tri-Active nozzle is a multi-purpose nozzle for carpets and hard floors.
- The side brushes catch more dust and dirt at the sides of the nozzle
and allow you to clean better along furniture and other obstacles.
English
9