cecotec BONGO A Serie Bedienungsanleitung Seite 24

ENGLISH
5. OPERATION
PUSH BUTTONS
• Power switch: Long press this push push button to turn the scooter on or off.
• Throttle: Use it to start the scooter up and to accelerate.
• Brake: Hold it pressed to stop. Gently step on the rear fender to assist the braking process.
• Function: Press this push button to adjust speed. Select between:
o ECO mode: No icon is shown on the display.
o COMFORT mode: The displays shows a white "D".
o SPORT mode: The display shows a red "D".
• Headlight: Short press the function push button twice to turn the headlight on. The back
lights are always on. While the lights are on, short press the function push button twice
to turn them off.
• Cruise mode: Ride at steady speed for 6 seconds to enter this mode. To deactivate it,
press the throttle or brake.
Note: This mode is not activated in the default configuration.
Note: The back light will blink when using the brakes.
On-board computer operating
The on-board computer offers the following functions:
P1: Selecting km/h or mph.
P2: Activating and deactivating cruise speed.
P3: Activating and deactivating start up with kick off (foot).
A.- Riding modes:
To select Eco mode, turn on the display
and red D symbols disappear from the right side of the display.
To select Comfort mode, turn on the display
D symbol appears in the right side of the display.
To select Sport mode, turn on the display
symbol appears in the right side of the display.
B.- Cruise speed
This mode can be activated or deactivated. To do so, hold down both buttons
46
and press the menu button until the white D
and press the menu button until the white
and press the menu button until the red D
until P0
is displayed. Then, press the menu button
enter to the function (cruise speed) and select 1 (deactivated) or 0 (activated). To confirm, press
both buttons and return to the home display.
C.- Automatic start
Automatic start can be activated or deactivated. To do so, hold down both buttons
P0 is displayed. Then, press the menu button
function (automatic start) and choose 1 (activated) or 0 (deactivated). To confirm, press both
buttons and return to the home display.
D. Speed measuring unit
Speed can be measured in km/h (0) or in miles/hour (1). To change it, go to menu P0 of the on-
board computer.
NOTE:
Bongo A Advance Connected Max Series features Smartphone App. Thanks to Bluetooth
connectivity, the electric scooter can be linked to your Smartphone and you can check
information and settings
HOW TO RIDE THE SCOOTER
1_Press the power push button for 2 seconds.
2_Stand on the board with 1 foot and kick off
with the other one to start the scooter.
ENGLISH
until you select P1. Once you have selected P1,
until
until you select P2. Once in P2, access to the
advance connected max
47