Safety Note; Maintenance And Care - Gima N-126 Handbuch

15
Index

SAFETY NOTE ......................................................................................................................................16

MAINTENANCE AND CARE ................................................................................................................16

1. COMPONENTS NAME ....................................................................................................................17
2. ASSEMBLY .......................................................................................................................................18
2.1 Assembly Diagram ....................................................................................................................18
2.2 Assembly procedure .................................................................................................................19
3. ADJUSTMENT AND OPERATION .................................................................................................20
3.1 Adjustment set diagram ...........................................................................................................20
3.2 Adjustment and Operation .......................................................................................................22
4. TECHNICAL SPECIFICATIONS ......................................................................................................24
4.1 Main Specifications .................................................................................................................24
4.2 Eyepiece and objectives ..........................................................................................................25
5. TROUBLESHOOTING GUIDE .........................................................................................................26
5.1 Optical System ..........................................................................................................................26
5.2 Mechanical System ...................................................................................................................27
5.3 Electrical System ......................................................................................................................27
Safety Note
1. Open the box carefully to avoid the accessories, like lens, dropping to ground or being damaged.
2. Do keep the instrument out of direct sunlight, high temperature or humidity, dusty and easy shaking
environment. Make sure the stage is flat, horizontal and firm enough.
3. When moving the microscope, carefully carry it with the handle and the base.
4. Make sure the instrument is earthed, to avoid lighting strike.
5. For safety, be sure the main switch is in "O" (off) state and cut off the power supply before replacing
the bulb or the fuse. If you replace the bulb during use or right after use, allow the lamp bulb and the
lamp house to cool completely before touching.
(Designated bulb: 1W S-LED)
6. Check the input voltage: be sure the input voltage which is signed in the back of the microscope is
consistent with the power supply voltage, or it will bring a serious damage to the instrument.
7. Always use the power cord provided by Gima.
8. The electrical equipment of the microscope should be discard as electronic waste.
Maintenance and Care
1. All the lenses have been adjusted properly; do not dismount them by yourself please.
2. The nosepiece and coarse and fine focusing parts are so delicate that it is forbidden to disassemble
them carelessly by yourself.
3. Keep the instrument clean, and do not pollute the optical element when wiping away the dust on the
instrument.
4. The contaminations on the prism, like fingerprints and oil smudges, could be gently wiped with a
piece of soft cloth or tissue paper, gauze which has been immersed in pure alcohol or ether. (Note
that the alcohol and ether are highly flammable, do keep them away from the fire or potential sources
of electrical sparks, and use them in a drafty room as possible as you can.)
5. Do not attempt to use organic solvents to clean the microscope components other than the glass
components. To clean them, use a lint-free, soft cloth slightly moistened with a diluted neutral deter-
gent.
6. When using, if the microscope is splashed by liquid, cut off the power at once, and wipe away the
splash.
ENGLISH