Switching On The Machine And Selecting A Programme - Bauknecht GSFS 60002 A+ Gebrauchsanweisung

SWITCHING ON THE MACHINE
AND SELECTING A PROGRAMME
Switching on the machine
q
1. Press the Power On/Off key.
2. Select the program suiting your dishes via the Program Selection button.
3. If you prefer or wish to prefer, you can choose additional function.
The lamp on Program Start/Pause key goes off once the Program starts and the washing lamp is
highlighted.
4. Start the program pressing the Power Start/Pause key.
The lamp on Program Start/Pause key goes off once the Program starts and the washing lamp is
highlighted.
Program follow-up
You can follow the program flow using the program follow-up lamps located on the control panel.
q
1. As long as washing continues, the lights of washing,rinsing and drying are on respectively.Machine
remains silent for about 40-50 minutes when the drying lamp is on.
2. Once the program is over, the lamp Finished is illuminated.
Do not open the cover before the lamp Finished is on.
Changing a programme
If you would like to change programs while a washing program is continuing.
q
1. Press once the Power Start/Pause key.
2. After the program stops, select your desired program via the Program selection button.
3. Start the program you have newly selected by pressing again the Start/Pause key.
The new program started will resume the course of the old program.
e r
w
w
40
w
e