Getting Familiar With Your Machine - Bauknecht GSFS 60002 A+ Gebrauchsanweisung

GETTING FAMILIAR WITH YOUR MACHINE

1. Power On/Off Button
When the Power On/Off button is pressed, the
lamp on the Start/Pause button starts lighting.
2. Door Handle
The door handle is used to open/close the door of
your machine.
3. Delay Timer Button
Thanks to the delay feature of your machine, you
can delay the start time of the program for 3-6-9-
12 hours by pressing Delay button.
When you pres delay button, 3h washing lamp
comes on. If you continue pressing Delay Button,
6h-9h-12h lamps will come on respectively on
each press. If you press delay button again after
12h lamp comes on, then you cancel delay time. If
you select delay time and press Start/Pause
button, then you activate delay time. If you want
to change delay time, you can adjust the new time
by pressing Start/Pause button and delay button.
Press Start/Pause button again in order to activate.
From this moment, the countdown starts. When
delay time is completed, delay lamp goes off, and
the washing program you selected starts
operating.
• If you press Delay button while 12h delay lamp
is lightened, delay lamp will go off. When you
press Start/Pause button with delay lamp off,
the selected program starts without any delay.
• When you delay a program, you can check the
remaining time through delay lamps. For
example; when you select 12h delay time, 12h
delay lamp comes on. When remaining time is
down to 9h, then 9h lamp comes on. In this
way, you can follow up the remaining time.
4. Prewash Button
If you select an extra pre-washing program, you
improve washing performance. When you select
pre-washing, since it improves washing
performance, it changes the temperature and
washing time of some programs.
Note 1: If you will only make pre-washing, start
the machine pressing the start/ stop key after
pressing the pre-wash key while the program is at
the cancel position.
Note 2: If you have used an extra feature on the
latest washing program, this feature will remain
active also on the next washing program. If you do
not want to use this feature on the newly selected
washing program, press the selected feature
button again, and check that the lamp on the
button goes off.
5. Start/Pause Button
Once you press the Start/Pause button, the
programme you selected with the programme
selector button will start running and the status
indicator lamp "wash" will light up.In the stop
condition while wash led is On, Start/Pause led
will blink.
6. Programme selector knob
With the programme selector knob, you can
select a suitable programme for your dishes.
7. Salt Lack Warning Indicator
In order to see whether softening salt in your
machine is sufficient or not, check salt lack
warning lamp on the display. When salt lack
warning lamp starts coming on, you need to fill in
the salt chamber.
Rinse Aid Lack Warning Indicator
In order to check that there is sufficient rinse aid
in your machine, check rinse aid lack warning
lamp on the display. When rinse aid lack warning
lamp starts coming on, fill in rinse aid chamber.
Note 3: During washing or when 3 in 1 detergent
is used, salt and rinse aid lack warning indicator
lamps will go off even if there is not sufficient salt
and rinse aid in the machine.
8. Program Monitor Lights
Program flow can be monitored via program
monitor lights on control panel.
• Wash
• Rinse
• Dry
• End
Child Lock Operation
In order to activate child lock, press Start/Pause
and Delay buttons simultaneously for 4 seconds.
When activated, 3h (washing) lamp flashes once.
The same operation is performed in order to
cancel child lock.
When child lock is cancelled, 3h (washing) lamp
flashes twice.
27