Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
United States and Canada: Plug holder B (2-990-242-01)
Other areas: Plug holder C (3-613-640-01)
CCA-5-3 Connection Cable (3 meters), CCA-5-10 Connection
Cable (10 meters)
RMM-301 Rack Mount Adaptor
Service Manual
Connectors for optical/electric composite cables:
• LEMO® FXW.3K.93C (to the "CAMERA FIBER" connector on
CCU)
• LEMO® EDW.3K.93C (to the "CCU" connector on CAMERA)
Caution on the optical/electric composite cable:
For connection between the camera control unit and a camera, be
sure to use an optical/electric signal composite cable with the
connectors specified in this manual in order to comply with the limit
for EMC regulations.
Related devices
HDC5000/5500 Color Camera
RCP-3000/1000 series Remote Control Panel
MSU-1000 series Master Setup Unit
HDCU3500
General
Power requirements
100 V to 240 V AC, 50/60 Hz
Current consumption
4.5 A (max.)
Operating
–10 °C to +40 °C (14 °F to 104 °F)
temperature
Storage temperature
–20 °C to +60 °C (–4 °F to +140 °F)
Mass
Approx. 6.3 kg (13 lb 14 oz)
External dimensions (Unit: mm (inches))
7
7
5 (
/
)
200 (7
/
)
32
8
13
10 (
/
)
32
Input/output connectors
CAMERA FIBER
Optical fiber connector (1)
INTERCOM/TALLY/
D-Sub 50-pin connector (1)
IO PORT
• INTERCOM (PROD/ENG), 4W: 0 dBu,
RTS: 0 dBu, CC: –14 dBu
• PGM, 3 systems, 0 dBu/–20 dBu
• TALLY (R, G, Y)
• FLAG
RCP/CNU
8-pin multi-connector (1)
TRUNK
12-pin (1)
LAN COM
8-pin (1)
NETWORK TRUNK
8-pin (1)
SDI I/O 1 to 4
3G/HD/SD SDI I/O
BNC type (4)
3G SDI: SMPTE ST424/425 Level-A/B,
0.8 Vp-p, 75 ohms, 2.970 Gbps/
2.967 Gbps
HD SDI: SMPTE ST292, 0.8 Vp-p,
75 ohms, 1.485 Gbps/1.4835 Gbps
SD SDI: SMPTE 259M, 0.8 Vp-p, 75 ohms,
270 Mbps
3G SDI/HD SDI/SD SDI, character signal
selectable
REFERENCE IN/OUT BNC type (2), loop-through output
HD: SMPTE ST274, tri-level sync signal,
0.6 Vp-p, 75 ohms
SD: Black burst (NTSC: 0.286 Vp-p,
75 ohms/PAL: 0.3 Vp-p, 75 ohms) or
NTSC 10F-BB
Input connectors
AC IN
100 V to 240 V AC (1)
SDI RET 1 to 4
BNC type (4)
3G SDI: SMPTE ST424/425, 2.970 Gbps/
2.967 Gbps
HD SDI: SMPTE ST292, 1.485 Gbps/
1.4835 Gbps
SD SDI: SMPTE 259M, 270 Mbps
PROMPTER 1
BNC type (2), loop-through output during
1CH mode, terminated internally at
PROMPTER 2/
75 ohms during 2CH mode, analog signal,
VBS-RET
1.0 Vp-p, 75 ohms
Output connectors
AUDIO OUT CH1,
XLR 3-pin, male (2), 0 dBu/–20 dBu/
CH2
+4 dBu
CHARACTER /
BNC type (1), VBS, 1 Vp-p, 75 ohms
AES/EBU /
AES/EBU format
SYNC
VBS and AES/EBU selectable
SDI OUT 1 to 4
3G/HD/SD SDI OUTPUT
BNC type (4)
3G SDI: SMPTE ST424/425 Level-A/B,
0.8 Vp-p, 75 ohms, 2.970 Gbps/
2.967 Gbps
HD SDI: SMPTE ST292, 0.8 Vp-p,
75 ohms, 1.485 Gbps/1.4835 Gbps
SD SDI: SMPTE 259M, 0.8 Vp-p, 75 ohms,
270 Mbps
3G SDI/HD SDI/SD SDI, character signal
selectable
17
Specifications
Werbung
Inhaltsverzeichnis
