Fader Start - Denon DN-X500 Bedienungsanleitung

ENGLISH ENGLISH

FADER START

5
If the separately sold DN-S3500, DN-D4500 and etc. players are connected to LINE2, 4, 6 or 8, they can be started using the source
input fader (Ch. Fader) or Crossfader, as long as the 3.5 mm stereo mini cords have been connected.
LINE 2 LINE 4 LINE 6 LINE 8
FADER
MAIN ALPHA MAIN
DN-S3500
DN-D4500
CD1
FADER FADER FADER FADER
LINE 2 LINE 4 LINE 6 LINE 8
DN-X500/X900
FADER FADER FADER
ALPHA MAIN ALPHA MAIN ALPHA
RCA cord
DN-S3500
DN-D4500
3.5 mm stereo mini cord
CD2
Channel Fader Start
Turn the INPUT ASSIGN switch
!2
to select the desired source
from LINE2, 4, 6 or 8.
1
Turn on the CH FADER START switch
#2
. (CROSS FADER ASSIGN position is
2 POST)
Move the source input fader (Ch.
!3
Fader) of CH-1, CH-2, CH-3 or
CH-4 control all the way to the
bottom.
3
4
Set the standby mode on CD player.
When you want to start the player,
move up the source input fader
!3
(Ch. Fader) and the CD player
will begin playing.
5
5
ENGLISH
Crossfader Start
Turn the INPUT ASSIGN switch
!2
to select the desired source
from LINE2, 4, 6 or 8.
1
Using the CROSSFADER ASSIGN
@7
switch , assign the channel or
2
Sampler source into A or B of
Crossfader.
#1
Turn on the CROSSFADER START A, B switches
3
@8
Slide the Crossfader all the way in direction
opposite the source you want to start. (In the following
example, startup is done with the CD player connected
set to Assign A.)
4
5
Set the standby mode on CD player.
@9
Use the CROSSFADER CONTOUR control
6
control the cross fader startup curve.
@8
When the Crossfader is slid in the opposite
direction, CD player play will begin.
7
.
to