Wireless Doorbell Chime Installation
Reset the Wireless Chime to factory settings:
1)
2)
3)
While holding down the volume button,
4)
A double 'ding-dong' will sound from the chime.
5)
All connections are cleared and the Chime is
1)
Plug the wireless
doorbell chime into
the socket.
2)
Wait until the blue LED
ring stops blinking.
3)
Press and hold the
volume button (lower
button), until the blue
LED ring lights up.
4)
While holding down the
volume button, press the
doorbell button on the
ProV1.
5)
The LED ring will flash
briefly . A connection has
been established.
6)
Now you can release the
volume button.
Unplug the wireless doorbell chime.
Press and hold the volume button.
plug the chime back into the socket.
reset to factory settings.
71