Weber Protect ProV1 Bedienungsanleitung Seite 62

Step 5:
Connect to ToSee Network. Connect to ToSee Network.
1) Select the 'ToSee_XXX'
Network in the WiFi settings. Network in the WiFi settings. Network in the WiFi settings.
2) Wait until the connection is Wait until the connection is Wait until the connection is
successful.
Note: The ProV1 will sound a short
beep after successful connection to
the 'ToSee_XXX' Network.
Step 6:
Back to the App.
1)
After the connection was successful, After the connection was successful, After the connection was successful,
a Pop-Up Window will appear on a Pop-Up Window will appear on a Pop-Up Window will appear on
top of your screen. (See picture) top of your screen. (See picture) top of your screen. (See picture)
2)
Press on the Pop-Up Window Press on the Pop-Up Window Press on the Pop-Up Window
displaying the following text: displaying the following text: displaying the following text:
'Return to ToSee App' . 'Return to ToSee App' .
3)
You will automatically be redirected You will automatically be redirected
back to the App.
Note: Some smartphones ask if the Some smartphones ask if the
connection to the ToSee network should be connection to the ToSee network should be
kept. Press 'Hold Network'. Hold Network'.
Note: If the Pop-Up Window does not If the Pop-Up Window does not
appear, manually return to the ToSee App. appear, manually return to the ToSee App.
62