Lyngdorf Audio TDAI-1120 Bedienungsanleitung Seite 41

•
Insert the USB drive into the "SW Update" connector on the back of
the TDAI-1120.
•
Turn off the TDAI-1120 by disconnecting the mains power.
•
Hold down the standby button on the front and connect the mains
power again.
•
When the Lyngdorf logo starts flashing, release the standby button
and the TDAI-1120 will update the software. When the update is
finished, the amplifier goes into standby.
Lyngdorf Audio TDAI-1120 – Owner's manual
ENG
DE
FR
41