Back Panel Guide - Lyngdorf Audio TDAI-1120 Bedienungsanleitung

ENG
DE
FR

Back panel guide

1. A1/PHONO MM: Connects directly to turntables/gramophones with high
output cartridges (MM: Moving Magnet). The ground cable from the
turntable/gramophone connects to the finger screw.
2. A2/ANALOG IN: Connects to tape recorders and other analog sources.
3. OUT: Analog connection to subwoofer(s), tape recorders, external
amplifiers or headphone amplifier.
4. MICROPHONE: Connects to the microphone and microphone cable for
RoomPerfect™ calibration.
5. D1-D2 COAXIAL DIGITAL INPUTS: Connects to CD players and other
digital sources.
6. D3-D4 OPTICAL DIGITAL INPUTS: Connects to CD players and other
digital sources.
7. USB: Connects to your FAT32 formatted USB storage (Pen Drive or
Network Attached Storage, NAS).
This connector can also power the external storage drive or other devices.
8. TV: (No video output) Connects to your television's HDMI ARC
connector for playing TV sound.
9. TRIGGER IN/OUT: These connectors allow you to have the TDAI-1120
activated by another product – or to have the TDAI-1120 activate other
products, when turned on and off.
10. MAINS POWER: Always use a mains cable that fits your mains power
outlet with ground connection. The TDAI-1120 will automatically adjust to
the mains power available.
Lyngdorf Audio TDAI-1120 – Owner's manual
11