Lyngdorf Audio TDAI-1120 Bedienungsanleitung Seite 24

ENG
DE
FR
You can control the volume level with the volume wheel, and the button
below will mute/unmute the sound.
You can change inputs, voicings and RoomPerfect™ position (individually
calibrated positions for optimal performance). You will be able to see the
type and quality of the audio signal received.
The lower section is dedicated to the adjustment of sound, Balance, Bass
and Treble. These work as traditional controls. For Bass and Treble you
can not only adjust the levels but can also change the frequencies that
must be attenuated or enhanced.
Polarity inversion is equal to changing + and – on the cables to the
loudspeakers. You can do this individually for each speaker.
The Streaming Audio interface for controlling the built-in media streamer is
found in the bottom section of this page. For information on the use of the
interface see section for Streaming Setup.
Hot tip: On your mobile device the Home Screen page
of your amplifier can be saved as an icon for swift
access to operation of the TDAI-1120.
Lyngdorf Audio TDAI-1120 – Owner's manual
24