Manage Software - Lyngdorf Audio TDAI-1120 Bedienungsanleitung

ENG
DE
FR

Manage software

Backup
When a USB device is inserted in the connector on the rear of the TDAI-
1120, this menu will allow you to store a complete backup of settings and
the RoomPerfect™ calibration. This will allow you to restore the amplifier to
this specific setup at a later date.
Restore
If a backup file is available on USB, you can select and load it.
Factory reset:
Restores the system to the default factory settings.
Warning: All user preference settings, system data, and
RoomPerfect™ data are lost when restoring to default
settings!
Download system log
This function will save a file on your PC/MAC. This file can be essential for
identifying a fault on your amplifier.
Update software
In this menu you will see the software version loaded on the TDAI-1120.
Refer to www.lyngdorf.com for the latest software.
To update the TDAI-1120:
On the web interface you can select a new software and directly update the
TDAI-1120 from the software server on the internet.
In case the TDAI-1120 is not connected to the internet, you can update the
software by saving the software file on a FAT32 formatted USB drive-
Through the web interface, select the software from the USB drive.
In case the web interface is not accessible, or a fault in the update process
has made the amplifier inaccessible, you can force a new software onto the
TDAI-1120:
•
Save the new software on a FAT formatted USB drive.
Lyngdorf Audio TDAI-1120 – Owner's manual
40