Voicing Setup; Audio Setup; Hdmi Setup - Lyngdorf Audio TDAI-1120 Bedienungsanleitung

ENG
DE
FR

Voicing setup

Enables and disables voicings to enable quicker selection of your preferred
equalization. Warmer sound, more bass – everything is available. See
separate manual for designing your own Voicings.

Audio setup

This section allows you to activate the following settings:
Enable ICC will ensure that a digital signal is not distorted due to high level
(modern music most often suffers from high compression and too high
levels to improve the appeal when played on the radio.
Show RoomPerfect™ bypass will allow you to test and demonstrate the
effect of the calibration.
Enable Subsonic filter will cut all signal below the audible frequencies. If
you are using a turntable, you need to have this filter activated in order to
not transmit vibrations to the pick-up cartridge.
Main volume control will allow you to set the default volume when turning
on the TDAI-1120, as well as to set a maximum limit to how loud the TDAI-
1120 may play.

HDMI setup

HDMI (High-Definition Multimedia Interface) is a standard for transmission
of video and audio from source to playback device. The connection
exchanges information as to available types of data against what the
playback devices will accept.
CEC (Consumer Electronics Control) is an HDMI feature designed to allow
commands to be sent from one product to another – as examples: allowing
the player to turn on the television or to control the volume setting of the
TDAI-1120 by using the remote control of the TV.
In all setups the level of CEC implementation on the television sets the
limits of the possible integration. Functions may be reduced to support your
own products and may not include full support of CEC codes.
Enable CEC will activate the function and allow your TV to connect to the
TDAI-1120.
Note: You need to set Standby level(General Setup) to
Network standby for CEC to function. As default, CEC is
Lyngdorf Audio TDAI-1120 – Owner's manual
36