Roomperfect™ Setup - Lyngdorf Audio TDAI-1120 Bedienungsanleitung

Generally, we recommend starting with a 4th order Linkwitz Riley filter,
which is selected when you activate the output by choosing one or two
Custom subwoofers.
Frequency sets the position of the crossover between loudspeakers and
subwoofer(s). Our recommendations are loaded when you activate the
analog output.
Output Level Control (Volume) has the following options:
•
Regulated makes the output level follow the level of the volume
control.
•
Full scale means there is a constant output at maximum level.
Warning: If full scale is selected, you will have full
volume output, and this can overload and damage
Enable Limiter will make sure that no matter how loud you are playing, the
output signal will be noiseless and safe for your connected equipment.
Selecting Advanced setup for an output will allow you to tweak the settings
to each output.
Under EQ you can now select Custom to design your own Pre-Equalizer,
which will allow you to add a filter to this output to optimize the
performance. RoomPerfect™ will calibrate against the performance with
this filter engaged.
Verify Speakers is a function to test your system connections. A tone will be
sent to each speaker and subwoofer. When you have verified that the
connection is correct, press Next and go through all outputs.
RoomPerfect™ setup
RoomPerfect™ is designed to analyze and correct for the negative effects
that the listening room has on the speaker sound. When a calibration is
being performed, the RoomPerfect
Lyngdorf Audio TDAI-1120 – Owner's manual
speakers.
TM
Icon will be blink.
ENG
DE
FR
31