BASETech E0217 Bedienungsanleitung Seite 2

Operating instructions
Thermometer E0217
Item no. 1426893
Intended use
This product is designed to measure the temperature in degrees Celsius (°C) or Fahrenheit (°F). The
temperature is displayed on the built-in LCD display. The temperature unit can be changed. The maximum
and minimum temperatures for each day are saved and can be displayed.
It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in bathrooms, must be
avoided under all circumstances.
For safety and approval purposes (CE), you must not rebuild and/or modify this product. If you use the
product for purposes other than those described above, the product may be damaged. In addition, improper
use can cause hazards such as short circuiting, fire, electric shock etc. Read the instructions carefully and
keep them. Make this product available to third parties only together with its operating instructions.
This product complies with the statutory national and European requirements. All company names and
product names are trademarks of their respective owners. All rights reserved.
Delivery content
• Thermometer
• Button cell CR2025 (pre-installed)
• Operating instructions
Up-to-date Operating Instructions
Download the latest operating instructions at www.conrad.com/downloads or scan the QR code above.
Follow the instructions on the website.
Safety instructions
Read the operating instructions carefully and especially observe the safety information.
If you do not follow the safety instructions and information on proper handling in this
manual, we assume no liability for any resulting personal injury or damage to property.
Such cases will invalidate the warranty/guarantee.
a) General information
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. This may become dangerous playing
material for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high humidity,
moisture, flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and protect it
from any accidental use. Safe operation can no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a low height can damage
the product.
• Also observe the safety and operating instructions of any other devices which are connected
to the product.
• Consult an expert when in doubt about operation, safety or connection of the device.
• Maintenance, modifications and repairs are to be performed exclusively by an expert or at a
qualified shop.
• If you have questions which remain unanswered by these operating instructions, contact our
technical support service or other technical personnel.
b) Battery
• Correct polarity must be observed while inserting the battery.
• The battery should be removed from the device if it is not used for a long period of time to
avoid damage through leaking. Leaking or damaged batteries might cause acid burns when
in contact with skin, therefore use suitable protective gloves to handle corrupted batteries.
• Batteries must be kept out of the reach of children. Do not leave batteries lying around, as
there is a risk that children or pets may swallow them.
• Batteries must not be dismantled, short-circuited or thrown into fire. Never recharge non-
rechargeable batteries. There is a risk of explosion!
Operating elements
2
1
Display symbols
MIN / MAX
MIN symbol / MAX symbol
°C / °F
Temperature unit symbol
1 °C / °F button
2 MAX MIN button
3 Stand/hanger
3
4 Battery compartment
(removable)
4
Battery symbol
Frost symbol (displayed when temperature drops
below 0 °C)
Thermometer symbol
Operation
a) Activating and changing the battery
• A button cell battery has been installed in the battery compartment by factory-default. Before first time
use, remove the protective plastic strip from the battery compartment. The protective strip prevents battery
discharge.
• Replace the battery once the display starts to weaken significantly or turns off completely. Proceed as
follows to insert a battery:
• Remove the battery compartment (4) on the bottom of the thermometer (observe the arrow markings).
• Insert a 3 V CR2025 button cell (included) with correct polarity into the battery compartment (observe
plus/+ and minus/-).
• Slide the battery compartment with the newly inserted battery back into the thermometer in the correct
position. Ensure that it clicks into place properly.
When changing/inserting the battery, also refer to the diagram on the back of the product.
Mounting the product
• Pull the stand (3) outwards. Place the product on a horizontal, stable and sufficiently large surface using
the stand. Use suitable padding to protect the surfaces of valuable furniture against scratches.
• Push the stand (3) upwards to use it as a hanger. Hang the product in a suitable location in your fridge, or
secure it to a ferromagnetic surface using the magnet.
Operation
a) Displaying the temperature
• After inserting the battery, all display symbols will appear briefly on the LCD display.
• The current temperature will be displayed.
• To select the temperature unit, press the °C / °F button (1). The unit changes.
• Press the button again to go back to the initial setting. You can choose between Celsius and Fahrenheit
for the temperature display.
• HH.H is displayed if the measured temperature exceeds +60 °C.
• LL.L is displayed if the measured temperature drops below -20 °C.
b) Displaying and deleting max/min values
• Press the MAX MIN button (2) to display the maximum and minimum temperature values. Press once to
display the maximum recorded temperature or twice to display the minimum recorded temperature. Press
three times to go back to the current temperature.
• The MIN and MAX symbols are displayed together with the values.
• The thermometer automatically switches back to the current temperature after 10 seconds.
• Press and hold the MAX MIN button (2) for 2 seconds to delete the maximum and minimum temperature
values.
• Removing and replacing the battery also deletes the saved values and clears the product memory.
Care and cleaning
• Under no circumstances should you service any of the components in the interior of the product, therefore
never open/dismantle it. The device does not require maintenance except for occasional cleaning.
• Remove the battery before cleaning the product.
• Never use aggressive detergents, rubbing alcohol or other chemical solutions, as these could damage the
casing or even impair the functioning of the product.
• Use a dry, lint-free cloth to clean the product. Do not press too hard on the surface when cleaning to avoid
scratch marks.
• Dust can be easily removed using a clean long-haired brush.
Disposal
a) Product
Electronic devices are recyclable waste and must not be disposed of in the household waste. At
the end of its service life, dispose of the product according to the relevant statutory regulations.
Remove any inserted batteries and dispose of them separately from the product.
b) Batteries
You as the end user are required by law (Battery Ordinance) to return all used batteries.
Disposing of them in the household waste is prohibited.
Batteries that contain hazardous substances are labelled with this symbol to indicate that
disposal in the domestic waste is forbidden. The designations for the heavy metals involved
are: Cd = Cadmium, Hg = Mercury, Pb = Lead (name on batteries, e.g. below the trash icon on
the left).
Used batteries can be returned to collection points in your municipality, our stores or wherever
batteries are sold.
You thus fulfil your statutory obligations and contribute to the protection of the environment.
Technical data
Power supply ........................................ 1 x 3 V/DC CR2025 battery (included)
Battery life ............................................. About 12 months
Temperature range ............................... -20 to +60 °C
Accuracy ............................................... ±1 °C (from -20 to +60 °C)
Operating/storage conditions ................ -20 to +60 °C, 20 – 90 % RH
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in
electronic data processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.
This publication represent the technical status at the time of printing.
Copyright 2016 by Conrad Electronic SE. *1426893_v2_0916_02_DS_m_2L_(2)