Unpacking The System; Specifications - AXTON AXB25P Bedienungsanleitung

Dear Customer
Thank you and congratulations on your purchase of the AXTON AXB25P. This active sub-
woofer system exclusively uses very high quality parts and components. As with all high-
quality car audio components, professional installation is highly recommended. If you plan
on installing this active subwoofer by yourself, please read the following installation guide
carefully, before you attempt the installation. You should retain this manual, the packing and
the purchasing receipt for future reference. For any further information about mounting, con-
necting or adjusting this subwoofer system, please contact your AXTON dealer.

uNPaCKING tHe sYstem

Carefully remove all parts from the giftbox and check whether they are in good undamaged
condition, and match with the set contents listed below:
AXB25P active subwoofer
n
Bass boost remote control
n
5-wire high level input plug
n
Mounting clamps
n
Set of mounting screws
n
Owner's manual
n
Please contact your authorized AXTON dealer, if the content of this set is incomplete,
or parts of it show signs of transport damage.

sPeCIfICatIoNs

10"/25 cm active trunk box subwoofer
n
Frequency response: 25 Hz – 200 Hz
n
85 W rms x 1 @ 4 ohms (<0.3% THD/14.4V)
n
125 W max. x 1 @ 4 ohms (<1.0% THD/14.4V)
n
Darlington class-A/B amplifier
n
Variable lowpass filter: 40 Hz – 200 Hz with 12 dB/Okt.
n
Phase-shift: 0–180°
n
Variable Bass-boost: 0–12 dB
n
RCA, variable input sensitivity: 165 mV – 5 V
n
External bass boost remote control
n
Signal to noise ratio: > 90 dB
n
Dimensions WxHxD: 280 x 80 x 340 mm
n
Net Weight: 5.1 kg
n
– 2 –