Unpacking The System; Specifications - AXTON AXB25A Bedienungsanleitung

Dear Customer
Thank you and congratulations on your purchase of the AXTON AXB25A. This active sub-
woofer system exclusively uses very high quality parts and components. As with all high-
quality car audio components, professional installation is highly recommended. If you plan on
installing this active subwoofer by yourself, please read the following installation guide care-
fully, before you attempt the installation. You should retain this manual, the packing and the
purchasing receipt for future reference. For any further additional information about mounting,
connecting or adjusting this subwoofer system, please contact your AXTON dealer.

UNPACKING THE SYSTEM

Carefully remove all parts from the giftbox and check whether they are in good undamaged
condition, and match with the set contents listed below:
AXB25A active subwoofer
n
High level input connector
n
Owner's manual
n
Please contact your authorized AXTON dealer, if the content of this set is incomplete,
or parts of it show signs of transport damage.

SPECIFICATIONS

■ 10" / 25 cm active subwoofer
■ Frequency response: 25 – 120 Hz
■ 70 W rms x 1 @ 4 ohms (< 1.0% THD / 14.4V)
■ 140 W max. x 1 @ 4 ohms (< 10% THD / 14.4V)
■ Class-D MOS-FET amplifier
■ Variable lowpass filter: 60 Hz – 120 Hz with 12 dB/oct.
■ Variable phase shift control: 0 – 180°
■ Variable input sensitivity, RCA: 0.2 – 5 V
■ Variable input sensitivity, high-level: 1.0 – 8 V
■ Signal to noise ratio: > 85 dB
■ Dimensions WxHxD: 266 x 320 x 385 mm
■ Net Weight: 9.0 kg
– 2 –
DIMENSIONS
Top
109 266
Side
385
385 385
Front
276
266 266
– 3 –
AXB25A AXB25A