Turn off the grandMA3 processing unit
-Press the power button on the front panel.
-A warning pop-up appears.
Shut down the grandMA3 processing unit
-Tap
OK
.
-The grandMA3 processing unit powers down.
-Set the power switch to position O.
Important:
You can disconnect the grandMA3 processing unit using the grandMA3 console or the grandMA3 onPC software. The
DMX output will then be immediately interrupted.
71
Usage Prévu
Sécurité
Support technique
Transport
Limitations
Quick Start
Entretient
Élimination
Données Techniques
Déclaration de conformité