MA lighting grandMA3 Kurzanleitung Seite 16

Turn on the grandMA3 processing unit
1. Unpack the device.
2. Remove the packaging and cushioning material.
3. Place the device indoors on a stable surface.
4. Download the grandMA3 onPC software on www.malighting.com
5. Install the software on your PC or laptop. For minimum requirements see System Requirements grandMA3 in the grandMA3
user manual.
6. Connect the grandMA3 processing unit with your PC, laptop, or a grandMA3 console using etherCON/RJ45 connector.
7. Start the grandMA3 console or grandMA3 onPC.
8. Switch on the grandMA3 processing unit:
-Insert powerCON TRUE1 into the corresponding jack.
-Connect the main power plug.
-Turn on the power switch:
-Set it to position I.
-The power switch lights up in red.
-Press the power button on the front panel.
-The device starts booting.
-The Mode Selection dialog appears.
17
Intended Use
Safety
Support
Transport
Limitations
Quick Start
Maintenance
Disposal
Technical Data
Declaration of Conformity