Setting The Date/Time - Grundfos Conex DIA-G Montage- Und Betriebsanleitung

11.8.6 Defining battery backup
In case of a power supply failure, the Conex
can be supplied with 24 VDC using an external
backup battery (UPS), for example Grundfos backup
battery, order no. 96725709 (336-308). A contact
from an integrated standby display on the battery
backup to an electrically isolated input on the
®
Conex DIA-G indicates that the battery backup is
ready for operation.
The battery backup function is switched on in the
"Battery backup" submenu, and a setting defines
whether the integrated relay for the battery backup
has an N.C. or N.O. function:
• Battery backup
– OFF.
– N.O. contact: Electrically isolated contact on
the UPS closes if the battery backup is faulty.
– N.C. contact: Electrically isolated contact on
the UPS opens if the battery backup is faulty.

11.8.7 Setting the date/time

Main menu > Setup
Submenu 1
Date/time
In the "Date/time" submenu, the current date and
time is set as well as the dates for daylight saving
settings, if applicable.
• In the "Time" submenu, set the current time in the
format hh.mm.ss.
• In the "Date" submenu, set the current date in the
format mm.dd.yyyy (when a language other than
English is set as the operating language, the
format is dd.mm.yyyy).
– The corresponding day of the week (Mon to
Sun) is then displayed automatically.
• In the "Daylight.sav.t." submenu, the beginning
and end of daylight saving time is set and the
time change selected (+ 1 h or + 2 h).
• Open the relevant submenu.
– The activated numerical field flashes.
– Press the [Up] or [Down] button to modify the
numerical values.
– Press [OK] to move to the next numerical field.
• Hold down the key to increase the setting speed
dynamically.
38
®
DIA-G
Submenu 2
Time
Date
Daylight sav.t.
Submenu 3
Start
End
Time shift
Off
Submenu 4
Time
Date
Time
Date
+ 1/+ 2 h