tell Gate Control PRO Schnell-Installationsanweisung Seite 6

Registering the super administrator and configuring a remote
access:
For full access to remote programming, it is necessary to configure a user with
Super admin role, and a remote access password for that user. New users can
either be added through the mobile app registration, which will be discussed later
in this guide, or in the Users menu as follows:
- In order to add users, first you need to read the settings and users stored in
the device. For this, click on the Read users
- Add a new user by clicking on the Add new
- Type in the user's Name and Phone number.
- Set the Role to Super admin, configure the Permissions as needed, click on
the OK button when finished, and then click on the Write users
write the user into the device.
- Switch to the Remote access menu and then click on the Add new
to configure a password for remote access.
- Select the User from the drop-down menu and enter the Password that you
want to use when signing in for remote programming, and then click on the OK
button.
- Click on the Write users
All data can be changed later, except the user's name. If you need to change the
name, you have to delete the user and add it again. Please note that deleting
a user will delete all mobile devices added to that user.
Configuring a system administrator:
In most applications, a separate administrator is needed for managing users in
the Gate Control PRO. You can add administrators by following the steps
specified above, but choosing the Admin option for Role. Besides the super
administrator, the administrator can also add and delete other users remotely.
If users with Admin role have also been added in the system, hereinafter the
system will send all user related notifications to these administrators. This serves
to relieve the super admin.
For a detailed explanation of the user management, please read the Installation
and Application Manual.
button to update the settings in the device.
6
button in the Users menu.
button.
button to
button