tell Gate Control PRO Schnell-Installationsanweisung Seite 12

FURTHER IMPORTANT
SOFTWARE:
Administrator e-mail address:
For receiving and initiating firmware updates remotely, enter your e-mail in the
Administrator's e-mail address field in the General device settings menu of
the programming software.
SMS forwarding:
The device can forward incoming SMS messages to the configured phone
number. For this, configure the phone number in the SMS forwarding phone
number field.
The phone number of the Gate Control PRO:
The mobile app can control your gate via phone call when a mobile Internet error
occurs and therefore it fails to control the gate through the Internet.
For this, configure the phone number of the SIM card installed in the
Gate Control PRO device under the General device settings menu, in the
Device phone number field found in the SIM settings section.
Attention! If you do not set the phone number of the SIM card as described
above, the mobile app will not be able to control the gate via phone call
when a mobile Internet error occurs!
Push messages on errors:
We recommend that you enable Technical error and Gate position limit error
notifications if an error output from your gate automation and/or a gate position
limit switch is connected to the device.
- Select the Mobile devices menu in the programming software and read the
users from the device using the Read users
- Select the mobile device to which error notifications should be sent, and click
on the Edit
- Enable the Technical error and Gate position limit error options, click on
the OK button, and then write the changes into the device using the
Write users
SETTINGS
button
button.
IN THE
button.
12
PROGRAMMING