When The Work Is Done; Changing The Dust Bag - Bosch bsgl31466 Gebrauchsanweisung

de en
8
Figure
Holding the power cord by the plug, pull out the
required length and plug it into the mains socket.
9
Figure
Press the on/off button in the direction of the arrow
to switch your vacuum cleaner on/off.
10
Figure
Adjust the suction by turning the on/off button in the
direction of the arrow.
Vacuuming
11*
Figure
Adjusting the floor tool:
Rugs and carpets
Hard surfaces
12
Figure
Remove the upholstery nozzle and crevice nozzle
from the accessories holder as illustrated.
13*
Figure
Vacuuming with accessories
Attach the nozzles to the suction pipe or handle as
required:
a)Crevice nozzle for vacuuming crevices and corners,
etc.
b)Upholstery nozzle for vacuuming upholstered
furniture, curtains, etc.
14
Figure
After use, push the crevice nozzle and upholstery
nozzle back into the accessories holder as indicated.
Turbo brush
If your vacuum cleaner is equipped with a turbo brush,
please consult the accompanying instruction manual
for notes on use and maintenance.
15*
Figure
Pet hair tool
Floor tool for easy, thorough removal of pet hair
To clean the nozzle, simply vacuum it using the fixed
/ telescopic tube
10
Hard-floor brush
Figure
Cleaning the hard-floor brush
Figure
a) Vacuum from below to clean the brushes.
b)Cut through threads and hairs wound round the
Figure
=>
=>
Figure

When the work is done

Figure
Figure

Changing the dust bag

Replacing the dust bag
Figure
a)If the dust bag change indicator is completely yellow
b)The handle can easily be detached from the hose to
16*
For vacuuming hard floor coverings (tiles, parquet
flooring, etc.)
17*
rollers using scissors.
Vacuum threads and hairs with the crevice nozzle.
18
You can use the parking aid on the side of the
vacuum cleaner if you wish to stop vacuuming for a
short time.
Once you have switched off the vacuum cleaner,
slide the catch on the floor tool into the groove on
the side of the appliance.
19
The appliance can also be carried using one of the
two handles when vacuuming steps, for example.
20
Unplug the vacuum cleaner.
Tug the power cord briefly and let go. The cable then
rewinds automatically.
21
To store or transport the vacuum cleaner, use the
storage aid on the underside of the vacuum cleaner.
Stand the vacuum cleaner up on its end. Slide the
catch on the floor tool into the groove on the
underside of the appliance.
22
when the floor tool is lifted from the floor and the
highest suction power is selected, the dust bag must
be changed. In this case it is essential to change the
dust bag due to the type of material it contains.
The nozzle, suction pipe and flexible tube
must not be blocked, as this would also
cause the dust bag change indicator to be
triggered.
remove blockages.