Security Instructions; Symbols; General Security Instructions - OSRAM e:cue SYMPL pro Node Installationsanleitung

Security instructions

1 Security instructions
Please read the safety instructions, provided in a separate manual, carefully.
Make sure that the environmental, mounting, and installation prerequisites
are met. This manual should be kept at a safe place and in reach of the
device.
1.1

Symbols

The exclamation mark warns about possible damage of the
!
device itself or connected devices.
i
The information symbol gives general hints and informs
about handling and procedures for use of the device.
1.2

General security instructions

Connect cables and data only when the device is powered
!
down.
Ground the Ethernet and DMX connection cables for outdoor
!
installations (optional for indoor only). Connect the
SYMPL pro Node to Protective Earth when at least one
connected cable runs outdoor.
The device must be supplied by a separate certified SELV
!
Class 2 power supply.
i
If security instructions are missing, please contact the
OSRAM support service to receive a new copy.
08