Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
5
Network configuration
The configuration of the e:cue SYMPL pro Node (e:pix) /
SYMPL essential Node is completely done via e:cue SYMPHOLIGHT. See
the SYMPHOLIGHT System Manual for details on configuration, available at
www.ecue.com.
The network properties of the device are preconfigured. The successful
installation of the power supply is required for changing the network
configuration. You can either adjust the network settings with
SYMPHOLIGHT or using the web interface of the device. Via the web
interface extended DMX / RDM settings are configurable.
5.1
Default network properties
The SYMPL pro Node (e:pix) / SYMPL essential Node has as factory setting
the default IP address 192.168.123.1.
DHCP is enabled by default.
Login credentials for the web interface of the SYMPL pro Node (e:pix)
/ SYMPL essential Node:
The default password is: ecue
To change the network configuration use either SYMPHOLIGHT or the web
interface of the device:
5.2
Network configuration with SYMPHOLIGHT
1.
Open the context menu of the SYMPL pro Node (e:pix) /
SYMPL essential Node in the Setup tab of SYMPHOLIGHT by a right-
click on the device.
Network configuration
19
Werbung
Inhaltsverzeichnis
