OSRAM e:cue SYMPL pro Node Installationsanleitung Seite 21

2. On the left side, select "Settings" and enter the default password
ecue:
3. Click "Apply". The Settings page is displayed:
4. Define the network settings at "Device Basics" to your needs. You
can also change the password for entry to the web interfaces of the
device here.
5. Click "Submit" to apply the settings.
The network configuration of the device is completed.
i
The employment of a discrete network is recommended.
i Note down all employed and, if applicable, reserved IP
addresses. Keep the information for future network
configurations.
Network configuration
21