Firmware Update; Dismounting - OSRAM e:cue SYMPL pro Node Installationsanleitung

Firmware Update

Exit the Test mode by leaving the Test mode page, e.g. go to "Dashboard"
or double-pressing the Identify button.
7 Firmware Update
To update the SYMPL pro Node (e:pix) / SYMPL essential Node, a
connection of the SYMPL pro Node (e:pix) / SYMPL essential Node to
SYMPHOLIGHT is required.
Updating with SYMPHOLIGHT
Use the usual update options in the Device Tree of the Setup tab in
SYMPHOLIGHT: select "Update firmware" in the context menu of the
SYMPL pro Node (e:pix) / SYMPL essential Node or click the Update
button in the head toolbar.
8

Dismounting

Disconnect all attached cables. Dismount the e:cue SYMPL pro Node
(e:pix) / SYMPL essential Node from the rail by pulling the black DIN rail
handle and unhitching the SYMPL Node. The dismounting is completed.
Before dismounting, appropriate measures must be taken to
!
protect the respective components against damage caused
by electrostatic discharge (ESD protection).
26