Dmx Connection; Power Supply - OSRAM e:cue SYMPL pro Node Installationsanleitung

i
Never connect more than one SYMPL pro Node (e:pix) /
SYMPL essential Node in factory state to a network. The
identical IP addresses will conflict and disturb proper
communication.
4.4

DMX connection

The SYMPL pro Node (e:pix) / SYMPL essential Node can control eight
DMX (e:pix) universes with its eight DMX ports. Connect DMX (e:pix)
devices to the SYMPL Node using 3-pin terminal plugs at the DMX interface
of the SYMPL Node.
The appropriate pin assignment is defined as follows:
From left to right: GND, DMX-, DMX+
It is recommended to use twisted pair cabling.
Use shielded cables for outdoor installations.
Ground the DMX connection cable for outdoor installations
!
(optional for indoor only). Ground each cable seperately.
4.5

Power supply

The e:cue SYMPL pro Node (e:pix) / SYMPL essential Node can be
powered by an external power supply or via Power-over-Ethernet.
PoE:
For PoE, simply connect an Ethernet connection from a power sourcing
device.
External power supply:
Connect the SYMPL pro Node (e:pix) / SYMPL essential Node to a certified
NEC Class 2 24 V DC power supply unit. Present power supply equates to
the status "On" or running of the SYMPL Node.
Installation
17