Guide Bar And Saw Chain Combinations; Saw Chain Filing And File Gauges; Ec Declaration Of Conformity - Jonsered CS 2236 T Bedienungsanweisung

Guide bar and saw chain combinations

The following cutting attachments are approved for the model Jonsered CS 2236 T.
Length, inch Pitch, inch
12 3/8
14 3/8
16 3/8
Saw chain filing and file gauges

EC Declaration of Conformity

(Applies to Europe only)
Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel +46-36-146500, declares under sole responsibility that the chain
saw for tree service Jonsered CS 2236 T from 2014's serial numbers and onwards (the year is clearly stated in plain
text on the type plate with subsequent serial number), is in conformity with the requirements of the COUNCIL'S
DIRECTIVES:
- of May 17, 2006 "relating to machinery" 2006/42/EC
- of December 15, 2004 "relating to electromagnetic compatibility" 2004/108/EC.
- of May 8, 2000 "relating to the noise emissions in the environment" 2000/14/EC.
For information relating to noise emissions, see the Technical data chapter. The following standards have been applied:
EN ISO 12100-2010, ISO 14982:2009, EN ISO 11681-2:2011
Notified body: 0404, SMP Svensk Maskinprovning AB, Box 7035, SE-750 07 Uppsala, Sweden, has carried out EC
type examination in accordance with the machinery directive's (2006/42/EC) article 12, point 3b. The certificates for EC
type examination in accordance with annex IX, have the numbers: 0404/13/2388.
In addition, SMP, Svensk Maskinprovning AB, Box 7035, SE-750 07 Uppsala, Sweden, has certified conformity with
annex V of the Council's Directive of May 8, 2000 "relating to the noise emissions in the environment" 2000/14/EC. The
certificates have the numbers: 01/161/104 - CS 2236 T.
The supplied chain saw conforms to the example that underwent EC type examination.
Huskvarna, March 24, 2014
Per Gustafsson, Development manager
(Authorized representative for Husqvarna AB and responsible for technical documentation.)
38 – English
TECHNICAL DATA
Guide bar
Gauge, mm Max. nose radius
1,3 7T
1,3 7T
1,3 7T
Saw chain
Length, drive links
Type
(no.)
45
Jonsered H37 52
56