Optional Accessories - Makita DUB362 Betriebsanleitung

MAINTENANCE
CAUTION:
• Always be sure that the tool is switched off and the
battery cartridge is removed before attempting to
perform inspection or maintenance.
• Never use gasoline, benzine, thinner, alcohol or the
like. Discoloration, deformation or cracks may result.
Cleaning (Fig. 11)
From time to time, wipe off the outside of the tool using a
cloth dampened in soapy water.
To maintain product
repairs, any other maintenance or adjustment should be
performed by Makita Authorized Service Centers, always
using Makita replacement parts.

OPTIONAL ACCESSORIES

CAUTION:
• These accessories or attachments are recommended
for use with your Makita tool speciied in this manual.
The use of any other accessories or attachments might
present a risk of injury to persons. Only use accessory
or attachment for its stated purpose.
If you need any assistance for more details regarding
these accessories, ask your local Makita Service Center.
• Makita genuine battery and charger
• Shoulder belt
NOTE:
• Some items in the list may be included in the tool
package as standard accessories. They may differ from
country to country.
Noise
The typical A-weighted noise level determined according
to EN50636:
Sound pressure level (L
Uncertainty (K): 1.8 dB (A)
Sound power level (L
Uncertainty (K): 2.3 dB (A)
Wear ear protection
8
SAFETY and RELIABILITY,
ENG108-1
): 79.1 dB (A)
pA
): 93.5 dB (A)
WA
Vibration
The vibration total
determined according to EN50636:
Work mode: operation without load
Vibration emission (a
Uncertainty (K): 1.5 m/s
• The declared vibration emission value has been
measured in accordance with the standard test method
and may be used for comparing one tool with another.
• The declared vibration emission value may also be
used in a preliminary assessment of exposure.
WARNING:
• The vibration emission during actual use of the power
tool can differ from the declared emission value
depending on the ways in which the tool is used.
• Be sure to identify safety measures to protect the
operator that are based on an estimation of exposure in
the actual conditions of use (taking account of all parts
of the operating cycle such as the times when the tool
is switched off and when it is running idle in addition to
the trigger time).
For European countries only
EC Declaration of Conformity
Makita declares that the following Machine(s):
Designation of Machine:
Cordless Blower
Model No./ Type: DUB362
Speciications: see "SPECIFICATIONS" table.
Conforms to the following European Directives:
2000/14/EC, 2006/42/EC
They are manufactured in accordance with the following
standard or standardized documents:
EN15503
The technical ile in accordance with 2006/42/EC is
available from:
Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium
The conformity assessment procedure required by
Directive 2000/14/EC was in Accordance with annex V.
Measured Sound Power Level: 93.5 dB (A)
Guaranteed Sound Power Level: 96 dB (A)
Yasushi Fukaya
Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium
value (tri-axial vector
): 2.5 m/s or less
2
h
2
2.9.2014
Director
ENG900-1
sum)
ENG901-1
ENH021-8