When Vga Or Dvi Is Connected To Tv; Audio Menu - AEG CTV 4818 Bedienungsanleitung

When VGA Or DVI Is Connected To TV:

v€htrÆv“r
q‚Ãs‚…Æv“rÆr‡‡vt
image size
By pressing “ ” / “ ” button, select image
size. "right/left to change image size" is
seen on the screen. By pressing “ ” / “ ”
button, you can change image size to fill all,
fill 1:1 and fill aspect.

audio menu

By pressing “ ” / “ ” button, select the
fourth icon. Audio menu appears on the
screen.
‰‚yˆ€r
uƒÃ‰‚yˆ€r
uƒÃ†‚ˆqÀ‚qr
ihyhpr
r„ˆhyv“r…
6WG
vqrÆ‚ˆq
q’h€vpà ih††
q‚Ãs‚…Ãhˆqv‚Ãhqwˆ†‡€r‡†
volume
By pressing “ ” / “ ” button, select volume.
"right/left to adjust volume" is seen on the
screen. Press “ ” button to increase vol-
ume level. Press “ ” button to decrease vol-
ume level. Volume level can be adjusted be-
tween 0 and 54.
hp volume
By pressing “ ” / “ ” button, select hp vol-
ume. "right/left to adjust hp volume" is
seen on the screen. Press “ ” button to in-
crease hp volume level. Press “ ” button to
decrease hp volume level. Hp volume
02-ENG-2707W-1546 UK-27 INCH TFT-(CHI MEI)(10 PAGE)-50055817.p65
vq‚
svyyÃhyy
hˆqv‚
!
$
€‚ ‚

‚
‚
‚
ENGLISH - 44 -
44
(headphone volume) level can be adjusted
between 0 and 100.
hp sound mode
By pressing “ ” / “ ” button, select hp
sound mode. "right to adjust hp sound
mode" is seen on the screen. Press “ ”
button change hp sound mode.
Hp sound mode is used to identify sound
mode of the headphone. hp sound mode can
be set to mono, stereo, dual a or dual b ac-
cording to the transmission.
balance
By pressing “ ” / “ ” button, select balance.
"right/left to adjust balance" is seen on the
screen. Press “ ” button to increase bal-
ance rightward. Press “ ” button to de-
crease balance leftward. Balance level can
be adjusted between -50 and 50.
equalizer
By pressing “ ” / “ ” button, select equal-
izer. "right/left for equalizer settings" is
seen on the screen. Press “ ” / “ ” or “OK”
button to enter equalizer menu. In equalizer
menu the sound mode can be changed to
user, flat, pop, rock, jazz and classic by
pressing “ ” / “ ” button. Equalizer menu
settings can be changed only when sound
mode is user. Select the desired frequency
by “ ” / “ ” button and increase or decrease
the frequency gain by pressing “ ” / “ ” but-
ton.
“M” button to exit the equalizer menu.
†‚ˆqÀ‚qr
!C“
$C“
$xC“
$xC“
xC“
AVL
By pressing “ ” / “ ” button, select AVL.
"right/left for AVL on/off" is seen on the
screen. By pressing “ ” / “ ” button set to
AVL on to activate it or off to deactivate it.
03.08.2004, 17:01
ˆ†r…
#!
"
&
'"