Active Window Switch; Programme Swap (Swap); Freeze Picture; Sound Indicator - AEG CTV 4818 Bedienungsanleitung

Active window switch

In PIP and PAP modes “ ” and “ ” buttons
are used to select active window. “ ” and
“ ” cursors are used to show the mute sta-
tus osd of the active window.

Programme Swap (SWAP)

This button is used to swap between the
programmes in the PIP window and main
picture if the screen layout is selected as
PIP.
PC screen is not displayed in PIP window.

Freeze Picture

You can freeze the picture on the screen by
pressing “OK” button. Display layout should
be selected as full screen for this feature. At
split screen and PIP layouts; this function is
invalid.

Sound Indicator

The alternatives of the indicator are Mono,
Stereo, Dual A and Dual B. This indicator is
displayed under the programme number in-
dicator on the screen. "I-II" button is used to
select Mono, Stereo, Dual A or Dual B.
0212
In Mono broadcast or in forced-mono (for
stereo broadcast).
67(5(2
In Stereo broadcast.
'8$/ $
02-ENG-2707W-1546 UK-27 INCH TFT-(CHI MEI)(10 PAGE)-50055817.p65
2.
ENGLISH - 50 -
50
If dual broadcast detected. Dual A is se-
lected in default and also can be selected
after Dual B by Remote Control.
'8$/ %
If Dual B selected by Remote Control.

Mute Indicator

It is placed in the upper left side of the
screen when enabled.
To cancel mute, there are two alternatives,
the first one is pressing " " button, thus the
volume is set to the preceding value, and the
second one is increasing/decreasing the
volume level, thus it starts from the previous
level to increase/decrease.
DÃÃDÃÃ DÃÃ
If PIP layout is selected, mute indicator is
displayed at the upper middle of the PIP win-
dow.
If Split Screen is selected, mute indicator is
displayed at the upper left side of the active
window.

AV Modes

By pressing the “SOURCE“ button or via
source select menu, you can switch your TV
to AV modes (except being in Teletext).
Pressing this button will consecutively
switch the TV in one of the optional AV
modes: Tuner 1, Scart 1, Scart 1 RGB,
Scart 2, Scart 2 RGB, PC, DVI, FAV and
SVideo.
While watching VCR; vcr item in options
menu should be set to on.
In order to quit the AV mode press the “TV”,
digit buttons or “-P/CH” or “P/CH+” .
03.08.2004, 17:01
79
6285&(