Split Screen; To Exit Teletext; To Display The Time; Fastext - AEG CTV 4818 Bedienungsanleitung

• Select the required subcode page number
by pressing four digit buttons (e.g. 0001).
• If the selected subcode page is not displayed
in a short time, press “
programme will be displayed on the screen.
• Teletext page number will be displayed on
the upper left corner of the screen when the
selected page is found.
• Press “ “ button to display the selected
Teletext page.

Split Screen

• During split screen, you can switch to the
teletext mode of the TV programme on the
left side of the screen only. Teletext is not
available on the right side of the screen.
• Select the programme on the left side of the
screen as the active window. Press the
“ ” button. Teletext will be displayed on
the screen. To exit teletext press “
“ 79 ” button.

To Exit Teletext

” or “ 79 ” button. The screen
• Press “
will switch to TV mode.

To Display The Time

• While watching a TV programme with Tele-
text transmission press “
current time information, captured from Tele-
text will be displayed on the screen.
• Press “ “ button again to remove the
time from the screen.
• If the programme being watched does not
have Teletext transmission, no information
will be displayed.

Fastext

Your TV supports the 10 page Teletext sys-
tem. When the page number of any of the 10
pages in memory is entered, the system will
not search for the requested page; instead it
will display the page automatically. If the re-
quested page is not in memory, the system
will search for the requested page number
02-ENG-2707W-1546 UK-27 INCH TFT-(CHI MEI)(10 PAGE)-50055817.p65
“ button. TV
” or
“ button. The
ENGLISH - 52 -
52
and save the 10 pages including the re-
quested page into memory after finding it.
For Fastext
The subject-heading for the information may
have a particular color.
• Press an appropriate RED, GREEN, YELLOW
or BLUE button in order to reach the relevant
page quickly.
For TOP text
TOP text mode of operation will be activated
automatically according to the transmission.
• If TOP text transmission is present, color
coded buttons will appear in status row.
• If TOP text transmission is not present, sta-
tus row will not appear.
The subject-heading for information may be
located in colored box.
In Top mode the “-P/CH” or “P/CH+” com-
mands will request the next or previous page
respectively. If TOP text transmission is not
available, in case of operation of these com-
mands, wraparound occurs. For example
page 100 appears to be one greater than
page 199.
Connect Peripheral
Equipment
There is a wide range of audio and video
equipment that can be connected to your TV.
The following connection diagrams show
you where the different (Optional) equipment
should be connected at the back or right
side of the TV.

Via The Euroconnector

TFT TV has 2 Euroconnector sockets. If you
want to connect peripherals (e.g. video, de-
coder, etc.) which have Euroconnectors, to
the TV, use SCART 1 or SCART 2 inputs.
If an external device is connected via
Euroconnector sockets TV is switched to AV
mode automatically. If the signal is RGB, se-
lect RGB in the source select menu to view
picture. If the external device is connected to
SCART 1, choose Scart 1 RGB. If the exter-
03.08.2004, 17:01