Installation Of The Tft Tv To The Wall - AEG CTV 4818 Bedienungsanleitung

Installation Of The TFT TV To The Wall

1- To install the TFT TV on the wall, first of all, foot assembly should be removed. (Figure 1).
Unscrew the 4 screws (M4 x 6) that attach the foot assembly to the TFT panel and remove
the foot assembly from the TFT panel.
2- Place the 4 plastic pins to the circular screw holes at the rear of the TFT and screw them to
the TFT panel with 4 (M6 x 20) screws.
3- Install the wall hanger as in figure 2 to the wall with 4 anchors (M7 x 30) and 4 screws (M4
x 30).
Decide the place on the wall where the TFT panel would be placed. Level and mark with a
pencil the 4 mounting points on the wall hanger. Drill pilot holes for the plastic anchors and
then fix the wall hanger with 4 screws (M4 x 30).
4- Raise the TFT panel and hang it to the holes on the wall hanger from the 4 hanging
screws at the rear of the TFT panel.
02-ENG-2707W-1546 UK-27 INCH TFT-(CHI MEI)(10 PAGE)-50055817.p65
),*85( 
ENGLISH - 35 -
35
7)7 3$1(/
6&5(: +2/(6
)25 3/$67,& 3,16
 6&5(:6
0 ; 
)227 $66(0%/<
03.08.2004, 17:01