Operation - PSSO K Serie Bedienungsanleitung

Tilted Suspension
A tilted installation can be carried out via two eye-bolts on top and one at the rear.
Clusters/Line Arrays
Only use certified flyware of renowned manufacturers. All instructions in the user manuals of the individual
components must be adhered to. Only use the components and accessory recommended by the
manufacturer. The flyware used must be installed in such a stable way that it can never fail.
..............................................................................................................................................................................
6

OPERATION

After having connected your amplifier to the mains, turn all level controls counterclockwise to the minimum
position. The last device to be switched on is the amplifier. Now adjust the volume with the level controls.
Caution! Always make sure that the output signal is not distorted and that your speakers will not get
damaged. During operation, please make sure the speaker always sounds well. When distortions can be
heard, either the amplifier or the speaker is overloaded. Overloads can quickly lead to amplifier or speaker
damage.
In order to avoid damage, please reduce the volume immediately when distortions can be heard. When
speakers are destroyed by overload, the guarantee becomes void. Always check the sound pressure level
with a meter in order to keep to the threshold. If you want to switch off the system, switch off the amplifier
first and then the pre-amplifiers in order to avoid acoustic shocks on the speakers.
W W W . P S S O . D E
29