Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Making the Connections
If the PA system is turned on, turn it off before making any connection.
1
The speaker system is equipped with lockable Speakon sockets that are wired in parallel and can be
used as input and output as desired.
For locking a Speakon connection turn the plug to the right. For unlocking pull the unlock button and
turn the plug to the left and pull it out of the socket.
2
Connect your PA amplifier optionally via a Speakon plug to the [INPUT] socket.
3
User the jack [LINK] as output for the feedthrough signal, e.g. for connecting the input of another
speaker system.
Pin occupation of the connectors:
2-way models
INPUT
1 = +/-
2 = n.c.
LINK
1 = +/-
2 = n.c.
Information on Installing Audio Cables
• Always treat cables carefully and protect them from damages during transportation.
• Install cables always in a structured way and protect them from damage.
• Cables must be installed in a way that no person can stumble over them. Always fix cables with an
appropriate tape.
• Cables should be installed directly (no loops, S-shaped overlengths).
• Always install cables far away from power cables (never closely parallel).
• Never put heavy objects like speaker systems, flightcases etc. on cables.
• Never operate cables wound up.
..............................................................................................................................................................................
5
INSTALLATION
The speaker system can be set up as desired. The location must be solid, plane, anti-slip, vibration-free,
oscillation-free, and fire-resistant. The installation area must hold a minimum point load of 5 times the
system's load (e.g. weight 20 kg - point load 100 kg). The speaker system must never be installed higher
than 100 cm without secondary attachment.
Information on Transport
For transport, the speaker system features two carrying handles. The speaker system should be carried
without force by two persons of the same size. Carrying the speaker system as one person alone should be
avoided as the high weight and the strain could lead to back damages and torsions. Please note that all
speaker systems with more than 25 kg weight must be transported with two persons.
Overhead Installation
If this speaker system will be installed in a mounting height higher than 1 meter (e.g. on the stage, on a
stage element or on a framework) we speak of overhead installation. For overhead installation, the speaker
system must always be secured with an appropriate secondary attachment.
Safety bonds are allowed as secondary attachment for all speaker system up to a maximum weight of 60 kg.
Heavier speaker systems must be secured via appropriate measures based on individual calculations.
W W W . P S S O . D E
3-way models
INPUT
1 +/- = LF +/-
2 +/- = MHF +/-
LINK
1 +/- = LF +/-
2 +/- = MHF +/-
24
Werbung
Inhaltsverzeichnis
