Kenwood AT971A Anleitung Seite 6

using an additional
attachment
tagliatelle
(AT971A)
tagliolini
(AT972A),
trenette
(AT973A)
and spaghetti
(AT974A)
1 To use these attachments you must
have rolled out pasta using the flat
pasta attachment (AT970A) first.
2 To fit any of the additional
attachments available, follow the "to
assemble" instructions.
3 Feed the rolled out pasta through
the pasta attachment and the
different cutters will slice the pasta to
create different pasta variations
4 Pasta can be left for up to 4 hours
before cooking.
to cook pasta
1 Bring a pan three quarters full of
water to the boil. Add salt to taste.
2 It is optional to add a small amount
of olive oil to the water, this may help
prevent the pasta from sticking.
3 Add the pasta and gently boil for
approximately 2 to 4 minutes to
taste.
cleaning
Don't wash any part in the
dishwasher.
1 Slide the slow speed outlet catch
and at the same time remove the
attachment from the mixer.
2 Wipe clean with a damp cloth. Do
not immerse in water.
,
.
recipes
basic pasta dough
500g (1lb 2oz) flour 00 grade or plain
flour
4 eggs
2.5ml ( 1 ⁄ tsp) salt
2
2.5ml ( 1 ⁄ tsp) oil
2
water if necessary
wholemeal pasta
500g (1lb 2oz) wholemeal flour
4 eggs
2.5ml ( 1 ⁄ tsp) salt
2
2.5ml ( 1 ⁄ tsp) oil
2
water if necessary
pasta rossa
500g (1lb 2oz) flour 00 grade or plain
flour
3 eggs
75 g (3oz) pureed tomato
2.5ml ( ⁄ tsp) salt
1
2
2.5ml ( ⁄ tsp) oil
1
2
water if necessary
Method
Put the flour, salt, oil and beaten eggs
(eggs should be mixed with tomato
puree if applicable) into the mixing
bowl.
Mix with the dough hook on speed
1-2 for approximately 2-3 minutes,
adding water if the mix is too dry.
Switch off the machine and gather the
ingredients together and knead by
hand until you obtain a smooth dough.
For best results, wrap the dough then
let it rest for approximately 15 minutes
before rolling out with the pasta
attachment.
Fit the flat pasta making attachment
and follow the previous instructions.
3