Getting Started; Replacing Battery; Weighing; Weigh And Add - Silvercrest H14271A Bedienungs- Und Sicherheitshinweise

Getting started

Q
1. Open the battery compartment
of the product by pushing the clip of the battery
compartment cover
compartment and lift the cover off.
8
2. Remove the isolating strip. This is located
between the battery and the battery compart-
ment .
8
3. Replace the battery compartment cover
the battery compartment
the two extensions on the battery compartment
cover engage in the two openings in the
9
battery compartment
compartment cover
partment until it noticeably and audibly
8
clicks into place.

Replacing battery

Q
1. Open the battery compartment
above.
2. Remove the used battery from the battery com-
partment by gently pulling the plastic grip
8
outwards. Make sure that you do not exert
10
too much pressure on the plastic grip
may otherwise be damaged.
Remove the battery from the battery compart-
ment .
8
3. Insert the new battery. Make sure that the polarity
is correct. The "+" must be pointing upwards and
the battery is held in the battery compartment
.
8
4. Close the battery compartment
above.

Weighing

Q
NOTE: The kitchen scale
0 g / 0.0 oz (the temperature will also be shown)
when you switch it on. If you place the weighing
bowl on the kitchen scale
1
it on, 0 g / 0.0 oz "Zero" is displayed.
However, if you place the weighing bowl
the kitchen scale after you have switched it on,
2
8 GB
on the back
8
towards the battery
9
on
9
. Make sure that
8
. Press the battery
8
onto the battery com-
9
as described
8
or it
10
as described
8
always starts at
2
before switching
2
on
1
the scale will indicate the weight of the weighing
bowl . Press the zero button
1
play to 0 g / 0.0 oz.
j
Place the weighing bowl
scale .
2
j
Press the ON / OFF button
kitchen scale on.
2
j
Select the unit of weight by pressing the Unit
button . You can choose between "g / kg"
6
and "oz / lb".
j
Place the food you wish to weigh in the bowl.
j
The LCD readout
5
food in the selected unit of weight.
NOTE: The scale operates almost exactly the
same way without the bowl
bowl, simply follow & repeat the same steps as
above except starting without the bowl

Weigh and add

Q
The kitchen scale allows you to weigh foods
2
consecutively without removing food already in the
weighing bowl .
1
j
Place the weighing bowl
scale .
2
j
Press the ON / OFF button
kitchen scale on.
2
j
Select the unit of weight by pressing the Unit
button . You can choose between "g / kg"
6
and "oz / lb".
j
Place the food you wish to weigh in the bowl.
j
The LCD readout
5
food in the selected unit of weight.
j
Now press the zero button
reads "TARE".
j
Now place more food in the weighing bowl
j
The LCD readout
5
food you have added in the selected unit of weight.
j
Continue in this way only until the maximum
capacity of the kitchen scale
the weighing bowl
to reset the dis-
7
on the kitchen
1
to switch the
3
indicates the weight of the
. To operate without
1
.
1
on the kitchen
1
to switch the
3
indicates the weight of the
. The scale now
7
indicates the weight of the
is reached or
2
is full.
1
.
1