Samsung DVD-L100W Bedienungsanleitung Seite 11

E N G L I S H
Connecting to a Stereo Component
Digital Connection
Digital Output (optical)
Audio component equipped with
After the completion of above connections;
1.Set the "Digital Output" to "PCM" (see page 54) in "AUDIO SETUP".
Digital connection to audio component or MD player without Dolby Digital decoder
• Audio CD or Video CD
Play the disc, with the audio mode set to "Left" or "Right". When connecting digitally,
DTS-encoded audio tracks will produce distorted sound.
• DVD Disc
When playing a Linear PCM Audio encoded disc, you must use the digital connection
method shown above.
CD recording using digital connection to a MD
When digitally connecting to an MD to record the content of a CD, track numbers on the MD
and the CD may not match.
Only use an optical Digital Cable which has been designed for use with portable DVD.
20
Downloaded from www.Manualslib.com
Optical Digital Cable Connect to optical digital input jack
optical digital input jack
manuals search engine
Connecting to a Stereo Component
Playing Dolby Digital (5.1-CH) and DTS Audio
• You can enjoy full and dynamic surround sound by connecting a Dolby Digital/DTS
digital surround processor or amplifier equipped with a Dolby Digital/DTS surround decoder
to the optical digital jack on the DVD player.
• When using DTS digital surround, select the DTS audio by using the disc menu screen
or function adjustment screen.
Optical Digital Cable
(Sold Separately)
Dolby Digital (5.1-Channel)/DTS
processor or amplifier
After making the connections shown above;
1. Set the "Digital Output" to "Bitstream" (see page 54) in "AUDIO SETUP".
Caution
• To play a DTS disc, you need a DTS processor or amplifier.
• If the DTS processor or amplifer you want to use does not have an optical digital input jack,
digital connection is not possible.
• Refer to owner 's manual of the processor or amplifier for details on connections.
E N G L I S H
Connect to an Optical Digital Input Jack
21