Adding Toner - Olivetti COPIA 9020 Bedienungsanleitung

COPY OUTFEED AREA (Left-hand side)
1. Remove the paper from the
copy collector tray.

ADDING TONER

1. Open the front panel and move
the developer unit lever in an
anti-clockwise direction.
4. Fit the edge of the cartridge in
the developer unit groove, and
insert the prong on the
cartridge into the hole of the
developer unit.
5. Press down on the cartridge
and remove the adhesive tape.
chap1.p65
Downloaded from www.Manualslib.com
2. Turn the knobb anticlockwise
2. Pull the developer unit out until
6. Tap the cartridge until all the
13
manuals search engine
and remove the jammed sheet.
it stops. Open the cover.
toner has gone in. Do not add
any more toner. Remove the
empty cartridge from the unit.
Close the cover and push the
developer unit back in.
01/02/00, 10.42
3. First close left-hand panel then
the front panel.
3. Shake the new toner cartridge.
7. Bring the lever back to its
original position. Close the front
panel.
13