Selecting The Copy Format - Olivetti COPIA 9020 Bedienungsanleitung

Manual
Cancel automatic exposure mode by pressing the AUTOMATIC EXPOSURE key (A-18) (the
AUTOMATIC EXPOSURE INDICATOR (A-19) light switches off) and use the EXPOSURE REGULATOR
(A-17).
To make darker copies, move the cursor to the right (dark half moon).
To make lighter copies, move the cursor to the left (light half moon).

SELECTING THE COPY FORMAT

Automatic selection (Standard mode)
The copier automatically selects the paper format most suited to the original and the reproduction ratio.
Automatic selection is already active at machine power on. When manualselection is active, proceed
as follows to change to automatic selection:
1. Place the original on the copyboard glass and lower the cover.
2. Press the PAPER SELECTION key (A-23) until the AUTO INDICATOR (A-8) switches on.
Note:
- Automatic selection and automatic zoom cannot be selected at the same time.
- If the required paper format (selected automatically) is not available, the format led flashes and the
led of the alternative copy format, selected automatically by the copier to complete the copying
process, switches on.
Manual selection
Press the PAPER SELECTION (A-23) key until the led of the required paper format led lights up.
REDUCTIONS AND ENLARGEMENTS
To reduce or enlarge copies, the user can select from 3 different possibilities: with fixed ratios, with zoom
and with automatic zoom.
Fixed reductions/enlargements
With this mode, an original in standard format can be copied to a smaller or larger standard size paper
(e.g. A3 -> A4 or A4 -> A3).
Selections
ENLARGEMENTS
REDUCTIONS
6
chap1.p65
Downloaded from www.Manualslib.com
Max 200%
A4 > A3
A3 > A4
Min 50%
6
manuals search engine
01/02/00, 10.42