Automatic Standby Function; Setting The Auto Shut-Off Time; Setting The Number Of Copies; Regulating The Exposure (Dark/Light) - Olivetti COPIA 9020 Bedienungsanleitung

AUTOMATIC STANDBY FUNCTION

The standby function is activated automatically when the copier has not been used for 15 minutes. Also
in this case, the indicator lights on the console switch off. The STANDBY key flashes (orange), and the
power on switch remainslit. Press the STANDBY key (A-32) to deactivate the function.

SETTING THE AUTO SHUT-OFF TIME

If the copier is not used for 30 minutes, the power will turn OFF automatically. To turn the power back
ON, press the Power Switch.
The Auto Shut-Off mode time can be set from 10 minutes to 2 hours.
1. Press the
2. The default time selection (A-4) is displayed on the control panel display.
3. Select the desired time setting with the ZOOM + (A-28) and - ZOOM (A-26) or Number Keys.
4. The selected timer setting (A-1 through A-9) is shown on the control panel display.
5. Press the Sorter (A-4) key to store the timer settings and exit this mode.
If you do not want to specify the time, press the Reset (A-15) key to exit without storing the timer
setting.

SETTING THE NUMBER OF COPIES

Use the NUMERICAL keys (A-31) to select the required number of copies. A maximum of 99 copies
can be set. To change the setting, press the CLEAR/STOP key (A-16) and then make the new selection.

REGULATING THE EXPOSURE (Dark/Light)

Automatic
With automatic exposure control mode, the copier automatically adjusts the degree of exposure to suit
the original.
This mode is activated at machine power on (Standard mode) and the AUTOMATIC EXPOSURE
INDICATOR (A-19) lights up.
When manual mode is activated, return to automatic mode by pressing the AUTOMATIC EXPOSURE
key (A-18).
chap1.p65
Downloaded from www.Manualslib.com
A (A-19) key for 5 seconds or more.
Display A-1 A-2
Time [min.] 10 15
5
manuals search engine
A-3 A-4 A-5 A-6
20 30 40 50
01/02/00, 10.42
A-7 A-8 A-9
60 90 120
5