Reductions/Enlargements; Using The Manual Multi-Feeder - Olivetti COPIA 9020 Bedienungsanleitung

Press the FIXED ENLARGEMENTS key (A-22) to copy to a larger format.
Press the FIXED REDUCTIONS key (A-20) to copy to a smaller format.
To return to 100% reproduction ratio, press the 1:1 RATIO key (A-21).
Reductions/Enlargement with the zoom
Using the zoom, you can produce reduced or enlarged copies by selecting a reproduction variable
between 50% and 200% with 1% increments.
Press the ZOOM+ key (A-28) to increase the reproduction ratio.
Press the -ZOOM key (A-26) to decrease the reproduction ratio.
When you press the Zoom key, the reproduction ratio is displayed for 2 seconds.
To see the value again, press the REPRODUCTION RATIO DISPLAY key (A-29).
Reductions/enlargements with automatic zoom
The reproduction ratio is set automatically (by the copier) according to the size of the original and the
paper format.
Press the AUTOMATIC ZOOM key (A-25) to activate the automatic selection of the reproduction ratio.
When this function is activated, the relative LED lights up.
Note
Automatic zoom is not possible when using the manual feeder or the universal tray.

USING THE MANUAL MULTI-FEEDER

The manual multi-feeder should be used when the tray with the required format, or the special media
feeder, is not inserted.
Up to 50 sheets (weighing between 64 g/m
Operating sequence:
1. Place the original on the copyboard glass
2. Press the FEED key (A-23) until the feeder led lights up
3. Lift the cover of the multi-feeder
chap1.p65
Downloaded from www.Manualslib.com
4. Insert the sheets and regulate
7
manuals search engine
2 2
to 128 g/m ) can be used.
the alignment guide according
to the copy format.
01/02/00, 10.42
5. Close the cover.
6. Press the PRINT key (A-30)
to start copying
7. Once copying has finished,
press the FEED key (A-23) to
return to the cassette feeder.
7