Installing The Charger - Samsung SR8825 Benutzerhandbuch

Operating the cleaner
INSTALLING THE ROBOTIC VACUUM CLEANER

INSTALLING THE CHARGER

1. Install the charger on a fl at surface.
2. There should be no obstacles 0.5 m to the left and
3. Install the charger in a location where it can be easily
4. Arrange the power cord along the wall.
5. When the fl oor is made of wood, install the charger
20_ Operating the cleaner
Downloaded from www.Manualslib.com
Power Lamp Power Lamp
Charging Lamp Charging Lamp
right and within 1 m of the front.
accessed by the robotic vacuum cleaner.
in the same direction as the grain of the wood.
Always keep the power cord of the charger
plugged into the power outlet.
NOTE
- If no power is supplied to the charger, the robotic
vacuum will not be able to fi nd the charger and will
not be able to charge automatically.
- If the robotic vacuum cleaner is separated from the
charger, the battery is automatically discharged.
manuals search engine