Abicor Binzel K10 Betriebsanleitung Seite 28

12 Disposal
12 Disposal
12.1 Materials
12.2 Consumables
12.3 Packaging
EN - 14
When disposing of the system, local regulations, laws, provisions, standards
and guidelines must be observed. Please observe the regulations on the
disposal of electronic scrap and dispose of this at your local waste disposal site
(e.g. recycling centre).
To correctly dispose of the product, it first must be disassembled. Please take
note of the following information:
 11 Disassembly on page EN-13
This product consists for the most part of plastics, steel and non-ferrous metals.
Steel and non-ferrous metals can be molten in steel and iron works and are thus
almost infinitely recyclable.
Oil, lubricants and cleaning agents must not contaminate the ground or enter
the sewage system. These materials must be stored, transported and disposed
of in suitable reservoirs. Please observe the relevant local regulations and
disposal instructions in the safety data sheets specified by the manufacturer of
the consumables. Contaminated cleaning tools (brushes, rags, etc.) must also
be disposed of in accordance with the information provided by the
consumables' manufacturer.
ABICOR BINZEL has reduced the transport packaging to the necessary
minimum. The ability to recycle packaging materials is always considered
during their selection.
Gouging torch