Daily Cleaning; Daily Maintenance; Troubleshooting - Abicor Binzel K10 Betriebsanleitung

10 Troubleshooting

9.1 Daily cleaning

9.2 Daily maintenance

10 Troubleshooting
EN - 12
DANGER
Electric shock
Dangerous voltage due to defective cables.
• Check that all live cables and connections are properly installed.
• Replace any damaged, deformed or worn parts.
NOTICE
• The specified maintenance intervals are guidance values and refer to
single-shift operation.
• Maintenance and cleaning work may only be carried out by qualified
personnel (in Germany see TRBS 1203).
• Always wear your personal protective clothing when performing
maintenance and cleaning work.
1 Remove weld spatter and impurities from the gouging torch.
1 Check the gouging torch for damage and replace damaged parts.
2 Ensure that all screwings are tight and retighten them if not.
DANGER
Risk of injury and machine damage when handled by
unauthorised persons
Incorrect repair work and modifications to the product may lead to major
injuries and machine damage. The product warranty will be rendered
invalid if the unit is handled by unauthorised persons.
• Operating, maintenance, cleaning, fault and repair work may only be
carried out by qualified personnel (in Germany see TRBS 1203).
Please observe the attached document "Warranty" and consult your retailer or
the manufacturer in case of any doubts and/or problems.
Gouging torch