Before Use; Indicator And Operating Elements - Starmix ISC Serie Bedienungsanleitung

Read the operating manual carefully before starting to use the
vacuum cleaner. It provides important instructions for the operation,
safety, care and maintenance. Keep the operating manual in a safe
place and, in case you sell the unit, hand it on to the next owner.
The manufacturer reserves the right to carry out modifications to
the design and equipment.
Any other work not covered by this operating manual must not be
carried out.
This machine is intended for commercial use, for example, in
hotels, schools, hospitals, factories, shops, offices and in the rental
business.

1 Indicator and operating elements

Select from the following functions and settings:
0 Vacuum cleaner is switched off
I Vacuum cleaner is running
Ready mode for ON/OFF automatic
A
mode
R Filter cleaning function
RA Ready mode for ON/OFF automatic
mode
Automatic shaker function
Fill level indicator *
Speed regulation *
ISC L
Setting the suction hose diameter *
ISC M,H
20 - GB

Before use

▶ When unpacking, check that the delivery is complete and that
there is no transport damage.
▶ Before using, the operators should be provided with information,
instructions and training for the use of the vacuum cleaner
and the substances that it is to be used for, including the safe
procedure for the removal of the gathered material.
- Plug socket current-conducting
- Plug socket current-conducting
- Automatic shaker function off
- Plug socket curren-conducting
- The vacuum cleaner is switched on and off via the connected electrical/compressed air
tool* at the plug socket.
- In this switch setting the vibrator is activated for approx. 10 sec. and then switches off
again automatically.
- Ready mode like >A< plus automatic filter cleaning.
- Filter cleaning is performed (switch setting RA) automatically during the next working
break when the minimum volume flow level is reached.
- When the container is full and/or there is a blockage in the suction hose, the full indicator
lights up. On the M and H vacuum cleaners, an acoustic signal is also emitted.
- The suction performance can be regulated using the speed regulator.
- Determine the maximum negative pressure for automatic shaking.
(*depending on the equipment variant of your vacuum cleaner)