Before The First Start-Up; Operation - Starmix NSG 1420 Bedienungsanleitung

en

2 Before the first start-up

Assembly
See Fig. B.
1. When unpacking, make sure everything is complete.
2. Immediately report any transport damage to the retailer.

3 Operation

Before every use, please note
Make sure that the following conditions are met:
r Vacuum cleaner, mains connection cable and suction hose are not damaged.
r All filters have been inserted and are not damaged.
Operating modes
Operating mode (depending on equipment)
Off
On
Minimum suction power
Maximum suction power
Standby mode for automatic switch-on,
infinitely adjustable speed control ECO-MAX
Standby mode for automatic switch-on,
infinitely adjustable speed control ECO-MAX,
automatic filter cleaning
Suck up dry materials
Tools required
Main filter (filter cartridge)
Filter bag for dust-free disposal of fine-grained
material to be sucked up
Accessories depending on the area of
application
1. Set required operating mode on the switch.
9 Vacuum cleaner is ready for vacuuming.
2. To adjust the suction power, select from the following options (depending on equipment):
– Move switch to ECO position
– Set speed on the switch
14
Description
Wall socket under voltage
Wall socket under voltage, manual
operation
Vacuum cleaner operates at low power
Vacuum cleaner operates at maximum
power
Vacuum cleaner is switched on and off
by the electrical tool
If the suction power drops, the filter
is cleaned in breaks between work (=
switched off electrical tool)
Notes
Vacuum cleaner, filter and accessories need to be dry.
If frequently changing between wet and dry vacuuming, use
a separate main filter.
When vacuuming soot, cement, plaster, flour or similar
dusts: Insert a filter bag in the dirt container so that the
dust does not stick and or cake.
Switch position
0
I
ECO
MAX
A